| |
|
| Innovative
high purity water systems from TKA |
| |
|
|
| TKA
- HP is a modularly constructed high purity
water system, developed specifically for the functional
production of high purity water at a favourable
cost. The water produced fulfils the requirements
for the most demanding laboratory uses, such as
sample preparation, the rinsing of highly sensitive
glassware and instrumental analyses (AAS, HPLC,
ICP, GC, AOX, TOC). The menu controlled operating
system and the TKA whisper-operation, which disturbs
neither concentration nor workplace comfort, make
TKA-HP Standard an uncompromising high purity water
system, specifically for your requirements.
|
|
The ultra pure water
quality:
Standard components:
Optional components:
Assurance of the ultra high purity
|
| TKA
High Purity Water Systems |
| Type |
UV/UF
|
UV
|
UF
|
Standard
|
| TOC-Value*
|
3
ppb |
3ppb
|
10
ppb |
10
ppb |
Conductivity
in µS/cm |
0.055
|
0.055
|
0.055
|
0.055
|
Retention
of pyrogens |
yes
|
no
|
yes
|
no
|
| Article no.:
|
080.811.040
|
080.811.050
|
080.811.030
|
080.811.020
|
| UV =
UV photo-oxidation |
UF =
Ultrafilter |
| *dependent
on feedwater quality |
|
| |
| The feedwater:
 |
Water pretreated by ion-exchange,
reverse osmosis or distillation |
| |
Recommended conductivity,
0,1 - 5 µS/cm |
| |
Feedwater temperature,
1-25°C |
| |
Feedwater pressure, 2-6 bar
|
The purified water:
| |
Conductivity
0.055 µS/cm (18.2 MW/cm) |
| |
TOC value
< 10 ppb* (no. 080.810.020)
|
| |
TOC value
3 ppb* (no. 080.810.050) |
| |
Flow rate,
up to 0.5 l/min |
| |
Bacteria
content, less than 1 CFU/ml |
| |
Particles
( 0.2 µm), less than 1 per ml |
| |
Water yield,
100% |
| |
*dependent
on feedwater quality |
|
|
Digital menu control:
LC-Display, with input keypad, for
the display of all operating functions and measured
values as well as error messages. Equipped with
the following functions:
| |
Digital conductivity
meter with automatic temperature compensation
for monitoring feedwater and purified water.
|
| |
Individually adjustable
limiting conductivity for feedwater and
purified water |
| |
Timer program for intermittent
switching of recirculating pump (interval
- permanent operation). |
| |
Display of temperature
(in °C), conductivity of feedwater and purified
water (in µS/cm), limiting conductivity
and error messages. |
| |
Disinfection menu |
|
| The
construction:
The high purity water system can
be installed either as bench-top or wall-mounted
unit. It consists of:
| |
Housing with digital
display |
| |
Low-noise conveying and
recirculating pump |
| |
High purity water resistant
pressure reducer |
| |
Plastic solenoid valve
as automatic rinse valve |
| |
Flexible removal dispenser
with recirculation and 0.2 µm sterilizing
filter |
| |
Disinfection of all water-carrying
parts |
| |
All components which
carry water are made of polypropylene or
high-quality natural materials. |
| |
UV photo-oxidation chamber,
effective wavelengths 185 nm / 254 nm,
reactor body of electropolished stainless
steel (only no. 080.810.050) |
|
|
Specifications:
| Voltage: |
110-230 V / 50-60 Hz
|
| Current: |
1 A |
| Connection: |
R 3/4 male thread |
Dimensions:
| Height: |
460 mm |
| Width: |
300 mm |
| Length: |
265 mm |
| Weight: |
15 kg |
Product #
| 080.810.020 |
(Standard) |
| 080.810.050 |
(Standard with UV photo-oxidation)
|
|
|
|
